2017 CNF NEW USER TRAINING SCHEDULE for REUs
UPDATED MONDAY, JUNE 5TH!
Please note, "ALL INTERNS" refers to ALL FIVE CNF REU + KEP REU AGOSTO-BERRIOS + PARADIM REU GOLDBERG
MONDAY, JUNE 12, 2017
PART ONE: Introduction to the CNF Cleanroom with Christopher Alpha; 250 Duffield Hall
9:00-11:15 a.m., ALL INTERNS; (dress for cleanroom)
SEI Discussion: Introduction to the Societal & Ethical Issues of Nanotechnology
11:30 a.m.-12:15 p.m., ALL INTERNS; 340 Duffield Hall
12:15-1:15 p.m., New User Luncheon, ALL INTERNS; 340 Duffield Hall
PART TWO: Chemical Safety Training with Michael Skvarla
1:30-6:00(ish) p.m., ALL INTERNS; 250 Duffield Hall
TUESDAY, JUNE 13, 2017
PLEASE NOTE: You must see the Part 3 video before meeting with your staff person, and your Part 1 and 2 paperwork MUST be logged in before you can take your Part 3. See Kathy Springer if you have any questions on your paperwork.
PART THREE VIDEO: Start with a 20-minute training video and a short quiz.; 250 Duffield Hall
8:30 a.m., ALL INTERNS (dress for cleanroom);
PART THREE: ONE-ON-ONE TRAINING: Meet your assigned CNF staff person in the CNF Lobby.
Part 3 takes anywhere from 60-90 minutes.
INTERN; CNF STAFF; TIME
Ms. Natalia Agosto-Berríos (KEP PI: Daniel); Michael Skvarla; 9:20 a.m.
Mr. Jonathan Chandonait (CNF PI: Xing); Edward Camacho; 9:30 a.m.
Mr. Gabriel Guisado (CNF PI: Hernandez); Jerry Drumheller; 9:40 a.m.
Mr. Michael Klaczko (CNF PI: Ober); Alan Bleier; 9:50 a.m.
Ms. Mónica López Martínez (CNF PI: Wang); Tom Pennell; 10:00 a.m.
Mr. Daniel Teal (CNF PI: Lal); Jeremy Clark; 10:10 a.m.
Ms. Kay Goldberg (PARADIM PI: Schlom); Aaron Windsor; 10:20 a.m.
For all the following tool trainings, please tog up and meet the staff person IN the cleanroom AT the tool, unless otherwise noted.
1:30 p.m., GENERAL LITHO TRAINING with Garry Bordonaro and Michael Skvarla
3:40-4:30 p.m., HEIDELBERG TRAINING with Garry Bordonaro (right after Litho Training ends….)
You will come out of these trainings with the ability to login and use the following tools; resist spinners, hot solvent bath, Heidelberg, YES and image reversal oven, and all Hamatechs.
WEDNESDAY, June 14, 2017
10:45-11:15 a.m., Class II Resists Training with Beth Rhodes, Class II Resist Spinning Room; ALL INTERNS!
11:40 a.m. - 12:10 p.m., ABM Contact Aligner Training with Edward Camacho; ALL INTERNS!
1:00 - 2:30 p.m., Computer Aided Design (CAD) Training with Alan Bleier; ALL INTERNS! Meet in the CAD Room, Phillips Hall
2:45-4:45 p.m., Woollam Spectroscopic Ellipsometer with Alan Bleier; Chandonait, Goldberg
3:00-4:30 p.m., SUSS MA6-BA6 Contact Aligner with Edward Camacho; Teal
THURSDAY, June 15, 2017
8:45-9:45 a.m., Arradiance ALD Training with Vince Genova; Chandonait
9:00-11:30 a.m., MOS Furnace Training with Phil Infante; Guisado
10:00-11:00 a.m., Cobra Training with Vince Genova; López Martínez
NOTE NEW TIME! 10:00-10:30 a.m., Glen 1000 Training with Jerry Drumheller; Chandonait, Goldberg
1:30-4:30 p.m., Stepper Training with Garry Bordonaro, 254 Duffield Hall; Guisado
POSTPONED! 3:00-5:00 p.m., Evaporator Training with Aaron Windsor; Goldberg, Teal
FRIDAY, June 16, 2017
10:00 a.m. - 12 noon, AJA Sputter Deposition Training with Tom Pennell; Guisado
10:00-11:00 a.m. Oxford 81 Training with Jeremy Clark; Teal
2:00-3:30 p.m., PRESENTATION 101 with Julie Nucci (340 Duffield Hall); ALL INTERNS!
MONDAY, June 19, 2017
10:00-11:30 a.m., Duffield Safety Training with Dan Woodie; Anderson, Goldberg, Klaczko, Vijayakumar
Starts in Dan’s office, 344 Duffield Hall
TUESDAY, June 20, 2017
11:30 a.m. - 1:30 p.m., General Electron Beam Lithography Training with Alan Bleier, CAD Room; López Martínez
3:00 - 5:00 p.m., JEOL 6300 Training with Alan Bleier; López Martínez
!!! PLEASE NOTE !!! PLEASE NOTE !!!
The REU INTERNS may not be the only participants in any of these trainings, so please be considerate and don't be late! Thank you. AND!! When you need tool trainings other than those scheduled above, use the online training scheduler. Remember — if there is a place to write a note, state "I am an REU intern and I need training on...." for the quickest response. If you don’t hear back from the staff person in a timely manner, please let Melanie-Claire know!
RETURN TO CNF REU
Back to Top