Cornell NanoScale Science & Technology Facility (CNF)
Center for Transportation, Environment & Community Health (CTECH)
Keeping the Ezra Promise (KEP)
Platform for the Accelerated Realization, Analysis, and Discovery of Interface Materials (PARADIM)
Platform for the Accelerated Realization, Analysis, and Discovery of Interface Materials Cornell (PARADIM CU)
Research Experience for Undergraduates (REU) Programs
2018 REU WEEK TWO;
INCLUDING CNF REU NEW USER & TOOL TRAINING SCHEDULE
PLUS MANDATORY EVENTS FOR ALL REU INTERNS!
MONDAY, JUNE 11, 2018
PART ONE: Introduction to the CNF Cleanroom with Christopher Alpha, 250 Duffield Hall
9:00-11:15 a.m., ALL CNF REU INTERNS (dress for cleanroom)
SEI Discussion: Introduction to the Societal & Ethical Issues of Nanotechnology
11:30 a.m.-12:15 p.m., ALL CNF REU INTERNS, 340 Duffield Hall
12:15-1:15 p.m., CNF New User Luncheon, 340 Duffield Hall
(ALL CNF REU, MANDATORY) (CTECH, KEP, PARADIM, PARADIM CU - Optional)
PART TWO: Chemical Safety Training with Michael Skvarla
1:30-6:00(ish) p.m., ALL CNF REU INTERNS, 250 Duffield Hall
TUESDAY, JUNE 12, 2018
PLEASE NOTE: You must see the Part 3 video before meeting with your staff person, and your Part 1 and 2 paperwork MUST be logged in before you can take your Part 3. See Kathy Springer if you have any questions on your paperwork.
PART THREE VIDEO: Start with a 20-minute training video and a short quiz., 250 Duffield Hall
8:30 a.m., ALL CNF REU INTERNS (dress for cleanroom)
PART THREE: ONE-ON-ONE TRAINING: Meet your assigned CNF staff person in the CNF Lobby. Part 3 takes anywhere from 60-90 minutes.
INTERN, CNF STAFF, TIME
Mr. Vivek Anil (PI, Shvets), Alan Bleier, 9:20 a.m.
Mr. Jordan Howard-Jennings (PI, Ober), Garry Bordonaro, 9:30 a.m.
Ms. Sierra Russell (PI, McEuen), Jeremy Clark, 9:40 a.m.
Mr. Kody Whisnant (PI, Stroock), Aaron Windsor, 9:50 a.m.
Mr. Reed Yalisove (PI, Engstrom), Vince Genova, 10:00 a.m.
For all the following tool trainings, please tog up and meet the staff person IN the cleanroom AT the tool, unless otherwise noted.
ALL CNF REU INTERNS:
1:30 p.m., GENERAL LITHO TRAINING with Garry Bordonaro and Michael Skvarla
3:40-4:30 p.m., HEIDELBERG TRAINING with Garry Bordonaro (right after Litho Training endsÖ.)
You will come out of these trainings with the ability to login and use the following tools; resist spinners, hot solvent bath, Heidelberg, YES and image reversal oven, and all Hamatechs.
WEDNESDAY, JUNE 13, 2018
10:45-11:15 a.m., Class II Resists Training with Tom Pennell, Class II Resist Spinning Room; RUSSELL
11:40 a.m.-12:10 p.m., ABM Contact Aligner Training with Edward Camacho; ANIL, HOWARD-JENNINGS, WHISNANT, YALISOVE
1:00-2:30 p.m., Computer Aided Design (CAD) Training with Alan Bleier Meet in the CAD Room, Phillips Hall; ANIL, HOWARD-JENNINGS, WHISNANT, YALISOVE
3:00-5:00 p.m., Odd-Even Hour Evaporator Training with Aaron Windsor; ANIL RUSSELL, YALISOVE
6:00-8:00 p.m., ALL REU INTERNS (CNF, CTECH, KEP, PARADIM, PARADIM CU)-MANDATORY!
Cornell REU Welcome Dinner, 700 Clark Hall; Hosted by CLASSE/CHESS
THURSDAY, JUNE 14, 2018
8:45-9:45 a.m., Oxford ALD FlexAl Training with Vince Genova; RUSSELL, YALISOVE
9:00-11:30 a.m., Furnace Training with Phil Infante; WHISNANT
12:00-1:00 p.m., ALL REU INTERNS (CNF, CTECH, KEP, PARADIM, PARADIM CU)-MANDATORY!
CCMR Hot Materials Talk & Lunch, 700 Clark Hall; Prof. Paul McEuen
The Rise and Fall of Hendrik Schon: A Case Study in Scientific Fraud
1:30-4:30 p.m., Stepper Training with Garry Bordonaro, 254 Duffield Hall; HOWARD-JENNINGS, RUSSELL
1:30-2:30 p.m. Oxford 100 PECVD System with Tom Pennell; WHISNANT
1:30-3:30 p.m., Woollam Spectroscopic Ellipsometer with Alan Bleier; ANIL, YALISOVE
FRIDAY, June 15, 2018
10:00-11:00 a.m. Oxford 81 Training with Jeremy Clark; RUSSELL, WHISNANT
10:00-11:00 a.m., VCA Optima Contact Angle Training with Jerry Drumheller; YALISOVE
11:00-12:00 p.m. Anatech Resist Strip with Jerry Drumheller; ANIL, RUSSELL, WHISNANT
1:30-4:00 p.m., ALL REU INTERNS (CNF, CTECH, KEP, PARADIM, PARADIM CU)-MANDATORY!
PRESENTATION 101 with Julie Nucci, Dave Botsch and Karlis Musa (219 Phillips Hall)
TUESDAY, JUNE 19, 2018
11:30 a.m. - 2:30 p.m., General Electron Beam Lithography Training with Alan Bleier, CAD Room; ANIL
3:00 - 5:00 p.m., JEOL 9500 Training with Alan Bleier; ANIL
!!! PLEASE NOTE !!! PLEASE NOTE !!!
The CNF REU INTERNS may not be the only participants in any of these TOOL trainings, so please be considerate and don't be late! Thank you. AND!! When you need tool trainings other than those scheduled above, use the online training scheduler. Remember -- if there is a place to write a note, state "I am a CNF REU intern and I need training on...." for the quickest response. If you donít hear back from the staff person in a timely manner, please let Melanie-Claire know!
return to reu main page
Back to Top