ComputingCleanroom and Equipment StatusCoral - XReporter
Button: Equipment ListButton: MSDS DatabaseButton: Policies & FormsButton: Education & TrainingButton: StaffButton: Events & Seminars Button: Publication Button: About CNF Button: Lab Manual

CNF Lab and Equipment Information
Report Trouble   ¦    View Open Trouble   ¦    Schedule Training   ¦



FilMetrics Film Measurement Systems

F40 / F50-EXR Optical Measurement Systems for transparent thin film measurement

FilMetrics F50
Manager: Rob Ilic
Equipment Training
Training for the FilMetrics systems is done with a training video available below. Once you have watched the entire video you are authorized to use the FilMetrics tools. The new F50-EXR is different from the F50/F20 shown in the video. You do not move the fiber optic on the new system as refractive index can now be measured on the automatic stage. Otherwise, the basic principles of use are the same. Refer to the F50-EXR documentation at the tool for information specific to this newer model.

Link to Video

Description:

The two FilMetrics systems at the CNF can measure optically transparent films.

The F50-EXR system can be used for measurements of thickness, refractive index(n), and dispersion(k), as well as wafer mapping of any of these properties from 30 nm up to 250 micron.

The F40 system is attached to a microscope for film thickness measurement from 20 nm to 20 microns with a measurement spot size ranging from 100 to 10 microns square. The use of the microscope allows you to make measurements on specific features of your pattern devices.

For both systems, a film model must be available that gives the n & k of the film over the optical wavelength range of the tool (200 - 850 nm doe the F40 and 380 nm - 1700 nm for the F50-EXR). For new films, the Woollam Spectroscopic Ellipsometer can give a thorough analysis and generate the required data so that the faster FilMetrics can be used for thickness mapping and other measurements.


Additional Resources:

Equipment Information Sheet


Back to Top

Notice Archive

EQUIPMENT LIST
METROLOGY

Alpha Step 200
CDE ResMap Resistivity 4-pt Probe
FilMetrics Film Measurement Systems
FleXus Film Stress Measurement
Leitz Film Measurement
P10 Profilometer
Soft Materials 4-point Probe
VCA Optima Contact Angle
Woollam Spectroscopic Ellipsometer
Zygo Optical Profilometer

Back to Equipment List



Button: Search Button: Search Keywords
Cornell University
NYSTARNNINNSF

This material is based upon work supported by the National Science Foundation under Grant No. ECS-0335765. Any opinions, findings, conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.

Cornell NanoScale Science & Technology Facility (CNF)
250 Duffield Hall, Cornell University, Ithaca, New York 14853-2700
Voice: 607-255-2329, Fax: 607-255-8601, Email: information@cnf.cornell.edu
Powered by ITX