ComputingCleanroom and Equipment StatusCoral - XReporter
Button: Equipment ListButton: MSDS DatabaseButton: Policies & FormsButton: Education & TrainingButton: StaffButton: Events & Seminars Button: Publication Button: About CNF Button: Lab Manual

CNF Lab and Equipment Information
Report Trouble   ¦    View Open Trouble   ¦    Schedule Training   ¦



Chemical Hoods

Acid / Base Fume Hoods for General Wet Chemistry Steps

General Chemistry Hood
Manager: Noah Clay
Backup: Sam Wright
Equipment Training
Training for the chemical hoods is covered with the general lab orientation. If you have any specific questions about using the chemical hoods, please contact the Safety Manager, Phil Infante.

Description:

The CNF has a variety of fume hoods for wet processing of samples. Hoods are available for acid and base/solvent processing. Spin Rinse Dryers (SRD) are available at most hoods for drying wafers after processing.

Measurements of the etch rates for common etchants is available below.

Processes Available:

  • DI Water
  • N2 blow off guns
  • Spin Rinse Dryers
  • Hotplates with Teflon thermocouples for closed-loop temperature control


Additional Resources:

Chemical Etchant Datasheets


Back to Top

Notice Archive

EQUIPMENT LIST
FACILITIES

Bottle Washer
Chemical Hoods
Chemical Waste
Cleanroom Suits and Supplies
Key System
Liquid Nitrogen
Spin Rinse Dryers
Toxic Gas System

Back to Equipment List



Button: Search Button: Search Keywords
Cornell University
NYSTARNNINNSF

This material is based upon work supported by the National Science Foundation under Grant No. ECS-0335765. Any opinions, findings, conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.

Cornell NanoScale Science & Technology Facility (CNF)
250 Duffield Hall, Cornell University, Ithaca, New York 14853-2700
Voice: 607-255-2329, Fax: 607-255-8601, Email: information@cnf.cornell.edu
Powered by ITX