Logitech Orbis CMP
CMP (Chemical Mechanical Polishing)
Manager: Christopher AlphaBackup: Tom Pennell , Michael Skvarla
The Logitech Orbis is a CMP tool capable of polishing 4 and 6 inch whole wafers. It can do automatic multistep polishing processes with diamond disk pad conditioning to maintain etch rates stability. The tool can be used for planarization or for damascene polishing of silicon oxide, silicon nitride, polysilicon, copper, tungsten, and other various metals. The CMP Primer, available below, describes the basics of CMP and covers the terminology of the process. If you are considering using CMP in your process please review the document and contact the tool manager early in your planning. Early planning will make proper integration of CMP into your process much easier.
Additional Resources:CMP Primer.pdf
CMP Pads & Slurries
Back to Top
This material is based upon work supported by the National Science Foundation under Grant No. NNCI-1542081. Any opinions, findings, conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.
If you have a disability and are having trouble accessing information on this website or need materials in an alternate format, contact firstname.lastname@example.org for assistance.
Cornell NanoScale Science & Technology Facility (CNF)
250 Duffield Hall, Cornell University, Ithaca, New York 14853-2700
Voice: 607-255-2329, Fax: 607-255-8601, Email: email@example.com
Powered by ITX