CNF - Lab and Equipment Information

CNF Lab and Equipment Information

Schedule Training ¦

CAC Name: PECVD

Oxford 100 PECVD System

IPE PECVD System

Manager: Phil Infante

Equipment Training
Training is performed on a request basis, please email the tool manger to request training. You will be emailed when then the next training is scheduled.

Description:

Currently available are a high rate oxide (250nm/min) and a low stress silicon nitride.

Currently being characterized to be added in the near future is a-silicon, doped oxides, SiC, and TEOS Oxide.

Capabilities:

Low pressure plasma decomposition/reaction of silane & other gases predominantly to form dielectrics for passivation & masking layers at low temperatures
Load Locked system capable of 3" to 200mm wafers
Gases: SiH4, N2O, NH3, PH3, B2H6, CH4, TEOS, CF4, and O2
Typical process pressure: 1.8 Torr
Process temperature range of 200 to 400 C

Additional Resources:

Equipment Information Sheet
Oxford PECVD Instructios updated.doc

Back to Top

ALD service scheduled extended to May 24
May 17, 2013
The system will be unavailable until May 24.

EQUIPMENT LIST

THIN FILM DEPOSITION

1. SC4500 Odd-Hour Evaporator
2. SC4500 Even-Hour Evaporator
AJA Sputter Deposition
CHA Evaporator
CVC Sputter Deposition
Electroplating Tanks
GSI PECVD
Oxford ALD FlexAL
Oxford PECVD
Parylene Deposition
PVD75 Sputter Deposition
ReynoldsTech Conductive Polymer Vapor Deposition Tool

Back to Equipment List

Cornell University

NYSTAR

NNIN

NSF

This material is based upon work supported by the National Science Foundation under Grant No. ECS-0335765. Any opinions, findings, conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.

Cornell NanoScale Science & Technology Facility (CNF)
250 Duffield Hall, Cornell University, Ithaca, New York 14853-2700
Voice: 607-255-2329, Fax: 607-255-8601, Email: information@cnf.cornell.edu