|
|
|
|
|
|
|
CNF Lab and Equipment Information
|
|
|
|
|
||||
|
|
|||
|
|
CHA Evaporator
CAC Name: CHA 3 Hearth Thermal Evaporator for Metal Films 
Manager: Aaron Windsor
Backup: Rob Ilic
Equipment Training
Training is by appointment via e-mail to rob@cnf.cornell.edu Description:The CHA Industries vacuum system is used for evaporating thin films by resistive heating. A cryopump enables base pressures of 10E-7 Torr range to be reached. The 2 kW power supply is used for thermal evaporation from three individually shuttered parallel sources which can be used for sequential thin films. Gold, silver, aluminum, nickel, chrome, copper and germanium are among the metals available for deposition. Films up to 500 nm can be deposited. This system is a rapid turn-around machine with a typical pump down time of 45 minutes. Additional Resources:Equipment Information SheetBack to Top |
|
 
THIN FILM DEPOSITION
1. SC4500 Odd-Hour Evaporator 2. SC4500 Even-Hour Evaporator AJA Sputter Deposition CHA Evaporator CVC Sputter Deposition Electroplating Tanks GSI PECVD Oxford ALD FlexAL Oxford PECVD Parylene Deposition PVD75 Sputter Deposition ReynoldsTech Conductive Polymer Vapor Deposition Tool Back to Equipment List |
|
|||
|
|
  
|
||
|
|
This material is based upon work supported by the National Science Foundation under Grant No. ECS-0335765. Any opinions, findings, conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation. Cornell NanoScale Science & Technology Facility (CNF) 250 Duffield Hall, Cornell University, Ithaca, New York 14853-2700 Voice: 607-255-2329, Fax: 607-255-8601, Email: information@cnf.cornell.edu Powered by ITX |
||