ComputingCleanroom and Equipment StatusCoral - XReporter
Button: Equipment ListButton: MSDS DatabaseButton: Policies & FormsButton: Education & TrainingButton: StaffButton: Events & Seminars Button: Publication Button: About CNF Button: Lab Manual

Report Trouble   ¦    View Open Trouble   ¦    Schedule Training   ¦

PVD75 Sputter Deposition

ITO Sputter Deposition System

PVD75 ITO Sputtering System
Manager: Aaron Windsor
Backup: Phil Infante
Equipment Training
Please contact the tool manager to schedule training.


The Kurt J. Lesker sputtering tool is currently configured to sputter Indium-Tin Oxide (ITO). The tool uses a 90% Indium /10% Tin target to reactively sputter with the oxygen introduced into the chamber. The composition of the ITO can be varied by controlling the percentage of oxygen that is introduced into the chamber. The lower the oxygen content; the more uniform, but the less transparent and more metallic the film will be. The tool has substrate rotation and heating capabilities up to 350°C. By heating the substrate you can create denser films. The tool has two platens: one for three 4" wafers and one that can handle a single wafer up to 8" in size. Uniformity ranges from 3-10% depending on how the sample is mounted.


  • ITO with 90% indium/10% tin target

Additional Resources:

Equipment Information Sheet

Back to Top


Button: Search Button: Search Keywords
Cornell University