ComputingCleanroom and Equipment StatusCoral - XReporter
Button: Equipment ListButton: MSDS DatabaseButton: Policies & FormsButton: Education & TrainingButton: StaffButton: Events & Seminars Button: Publication Button: About CNF Button: Lab Manual

CNF Lab and Equipment Information
     Schedule Training   ¦


Custom made drill for microfluidic through holes

Manager: Sam Wright
Backup: John Treichler
Equipment Training
Please contact the tool manager to schedule training.


The micro drill is a custom made drill that is configured for 3", 4", and 6" wafers as well as glass slides. The drill is capable of drilling silicon, quartz, or glass with diamond coated micro drills. With three collets holding drill shanks from 0.040" to 1/8", it allows a variety of drill sizes ranging from 0.006" (~150 µm) to 0.065" (1650 µm).

Although the actual size of the finished hole is 60 - 70% larger than the drill, the micro drill is a quick and efficient method for through hole making for microfluidic devices. This tool is located in Room 224.


  • 3
  • Glass slides
  • Silicon, quartz, and glass
  • Drill sizes from 0.006

Additional Resources:

Equipment Information Sheet

Back to Top


Button: Search Button: Search Keywords
Cornell University