Tool for printing a variety of materials onto substrates (Rm 224).
Manager: Beth RhoadesBackup: Christopher Alpha
The FUJIFILM-Dimatix inkjet printer prints a range of fluids in non-contact mode. It uses disposable MEMS piezo drop-on-demand print cartridges. The printer features drop visualization, tunable jetting controls for each of the 16 nozzles, and a visual registration/alignment system. Dispensed drop sizes are 1 or 10 pL with a placement accuracy of 10-20 µm. Particles smaller than 500 nanometers can be printed. Substrates can be rigid or flexible and up to 8 x 12 inches. A UV lamp can be attached to the print carriage for curing UV inks.
the printability of an ink is limited to key parameters of viscosity, surface tension and particle size. Users have printed the conductive polymer PEDOT, water containing DNA or protein, silver nanoparticle solutions, CNT-containing solutions, pigment inks, and UV curables (Shipley S1813 resist and polyimide).
The printer has been used to make organic electronics, photovoltaics, nanoparticle-based patterns, and biomolecule arrays, and patterned photresist structures.
suggested substrates and inks
common viscosities and surface tensions
Back to Top
This material is based upon work supported by the National Science Foundation under Grant No. NNCI-1542081. Any opinions, findings, conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.
If you have a disability and are having trouble accessing information on this website or need materials in an alternate format, contact email@example.com for assistance.
Cornell NanoScale Science & Technology Facility (CNF)
250 Duffield Hall, Cornell University, Ithaca, New York 14853-2700
Voice: 607-255-2329, Fax: 607-255-8601, Email: firstname.lastname@example.org
Powered by ITX