LinkCAD pattern preparation software
Software for converting DXF files to GDS and performing logical operations
Manager: Alan R. BleierBackup: Karlis Musa
This software can be used to convert DXF files into GDSII. It is also useful for performing logical operations on layers within a GDSII file. For example, the inversion of the tone of a layer can be performed quite easily using this software.
Additional Resources:AutoCAD to GDS Design Rules
LinkCAD Knowledge Base
Back to Top
This material is based upon work supported by the National Science Foundation under Grant No. ECCS-1542081. Any opinions, findings, conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.
If you have a disability and are having trouble accessing information on this website or need materials in an alternate format, contact email@example.com for assistance.
Cornell NanoScale Science & Technology Facility (CNF)
250 Duffield Hall, Cornell University, Ithaca, New York 14853-2700
Voice: 607-255-2329, Fax: 607-255-8601, Email: firstname.lastname@example.org
Powered by ITX