CVC Sputter Deposition
Magnetron Sputter system for depositing thin metal & dielectric films
Manager: Jerry DrumhellerBackup: Sam Wright
A cryopumped CVC 601 sputter deposition system allows deposition of a variety of metals. A full target list is available below. Both RF and DC magnetron sputtering are available. Materials can be co- deposited from two sources onto the rotating substrate. Eight-inch sputtering targets are used, allowing batch depositions over 3-inch to 6-inch wafers. Smaller pieces are easily used.
Targets available (8 inch diameter)are: Al, Al+1%Si, Al+1%Si+4%Cu, Co, Cr, Cu, Mo, MoSi, Nb, Si, SiO2, Ta, Ti, TiW, W
Additional Resources:CVC Sputter Deposition target request and changing procedures
Back to Top
This material is based upon work supported by the National Science Foundation under Grant No. NNCI-1542081. Any opinions, findings, conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.
If you have a disability and are having trouble accessing information on this website or need materials in an alternate format, contact email@example.com for assistance.
Cornell NanoScale Science & Technology Facility (CNF)
250 Duffield Hall, Cornell University, Ithaca, New York 14853-2700
Voice: 607-255-2329, Fax: 607-255-8601, Email: firstname.lastname@example.org
Powered by ITX