CNF Lab and Equipment Information
CAC Name: Parylene
Tool for depositing conformal parylene films (Rm 228)
Manager: Rob IlicBackup: Beth Rhoades
Model PDS 2010 LABCOTER deposition system is the first portable system designed for deposition of protective Parylene conformal coating. This unit is suitable for laboratory research applications, circuit board repairs, electronic sensors, medical components, organic samples, and many other substrates.
Good to excellent adhesion of Parylene to a wide variety of substrates can be achieved by the simple treatment with a dilute solution of an organic silane prior to Parylene coating. Parylene exhibits very little absorption in the visible region and is, therefore, transparent and colorless. Below about 280 nm both Parylene N and C absorb strongly. The Parylenes resist room temperature chemical attack and are insoluble in all organic solvents up to 150° C. Furthermore, chemical resistance and moisture vapor permeability rates for Parylene C are superior to almost all polymeric materials.
Additional Resources:Equipment Information Sheet
Quick Start Instructions
Back to Top
ALD service scheduled extended to May 24
May 17, 2013
The system will be unavailable until May 24.
THIN FILM DEPOSITION
1. SC4500 Odd-Hour Evaporator
2. SC4500 Even-Hour Evaporator
AJA Sputter Deposition
CVC Sputter Deposition
Oxford ALD FlexAL
PVD75 Sputter Deposition
ReynoldsTech Conductive Polymer Vapor Deposition Tool
Back to Equipment List
This material is based upon work supported by the National Science Foundation under Grant No. ECS-0335765. Any opinions, findings, conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.
Cornell NanoScale Science & Technology Facility (CNF)
250 Duffield Hall, Cornell University, Ithaca, New York 14853-2700
Voice: 607-255-2329, Fax: 607-255-8601, Email: email@example.com
Powered by ITX